Modern technology is advancing fast, and it needs more precise machinery. That’s why EDM small-hole drilling machines have come into use.
An EDM small-hole drilling machine is a piling tool. It uses gravity and impact force to drive piles into the ground. The main parts of an EDM small-hole drilling machine are a cylinder and a piston. When using an EDM small-hole drilling machine, you must follow operation rules strictly and do safety checks carefully. What exactly are the operation requirements and safety inspection steps for an EDM small-hole drilling machine? Here’s a detailed explanation:
- Operation Requirements for EDM Small-Hole Drilling Machines
- Keep the EDM small-hole drilling machine On most construction sites, the ground is sloped to some degree. If you use the EDM small-hole drilling machine on a sloped surface, make sure it doesn’t tip over. If the ground is soft, compact it first to prevent the EDM small-hole drilling machine from becoming unstable.
- Follow the instruction manual closely when installing the EDM small-hole drilling machine. Keep the wiring in the work area at a safe distance from the EDM small-hole drilling machine. The track laying must also meet relevant rules to ensure the EDM small-hole drilling machine works normally.
- Safety Inspection for EDM Small-Hole Drilling Machines
- Make sure there are no high-voltage lines above the EDM small-hole drilling machine’s working area.
- Before starting the EDM small-hole drilling machine, check that the pile hammer, pile cap, and pile are aligned in a straight line. Don’t use the EDM small-hole drilling machine for piling if they are off-center.
- If the EDM small-hole drilling machine is not used for a long time, lower the pile hammer. Never leave the pile hammer hanging when maintaining the EDM small-hole drilling machine.
- Ensure all lubrication points of the EDM small-hole drilling machine are properly lubricated. No part of the EDM small-hole drilling machine should be left unlubricated. Add lubricating oil according to the manual’s requirements for the EDM small-hole drilling machine.
- When the EDM small-hole drilling machine runs continuously, supply enough cooling water. Never run the EDM small-hole drilling machine without water.